The POCO X3 is a powerful, yet affordable smartphone that has brought the mobile gaming experience to new heights. However, there are some common problems that plague many users. This article will provide troubleshooting tips for common issues with your POCO X3.
The poco x3 nfc touch problem is a common problem in the POCO X3. This article will list some of the most common fixes for this issue.
Hello there, friends, and welcome back to the fantastic article. In this post, we’ll look at how to troubleshoot some of the most frequent issues with the Poco X3.
Before we get started, let’s go over some of the phone’s specifications.
Poco, a Xiaomi sub-brand, has just introduced a new phone to its X-series lineup, the Poco X3. It has a 6.67-inch IPS FHD+ display with a 120Hz refresh rate.
According to GSMarena, the Poco X3 is powered by Qualcomm’s newest Octa-core Snapdragon 732G (8 nm) CPU and comes in three different configurations: 6GB RAM, 64GB storage, 6GB RAM, 128GB storage, and 8GB RAM, 128GB storage.
When it comes to the battery and operating system, the Poco X3 is powered by a large 6000 mAh battery that supports 33W fast charging and runs on the newest MIUI 12 based on Android 10.
When it comes to cameras, it’s a no-brainer.
With a 64-megapixel main camera, an 8-megapixel ultrawide camera, a 2-megapixel macro sensor, and a 2-megapixel depth camera, the Poco X3 features a quad-camera system.
That’s All There Is To It
Many customers are experiencing difficulties and problems with the Poco X3 smartphone after using it for a while.
But don’t worry; in today’s tutorial, I’ll show you how to troubleshoot Common Poco X3 Issues and provide a working solution.
Troubleshoot Common Poco X3 Issues: Network, Heating, Camera, and Other Issues
First and foremost, we will cover numerous frequent difficulties and problems with the Poco X3 in this post, as well as remedies to these issues.
All of the actions and cures I’ve listed here have been tried and true, so keep reading to the conclusion.
Don’t worry, I’ve listed 12 typical issues and their remedies, a difficulty that nearly everyone encounters.
I am certain that by following this instruction today, you will be able to solve the issue on your phone.
Please take your time to go through all of the actions and treatments outlined in this article. This tutorial will ultimately be of use to you.
Problem – Poco X3 has a network issue.
If you have a network issue with your Poco X3? So don’t worry, I’ve compiled a list of practical solutions to help you solve the network issue on your Poco X3.
Solutions:
- For a few seconds, toggle the airplane mode on and off.
- Turn off your SIM card for a while and then turn it back on.
- Make sure your device is in Safe mode before proceeding. Here’s a complete list of resources.
- Reset your device’s network settings once.
- Also, make sure your software is up to date.
- If your issue hasn’t been addressed, your Poco X3’s last choice is to factory reset it.
- That’s All There Is To It
Here’s how to fix a network issue on a Samsung Galaxy Tab S7 FE!
Problem – Is your Poco X3 overheating?
When you play games or utilize features or applications that demand a lot of power, your phone’s battery drains quickly, causing your phone to heat up and get uncomfortable.
Solutions:
- Turn off Wi-Fi, GPS, Bluetooth, and other connection options if you aren’t using them.
- Reduce screen brightness by turning off auto-brightness.
- Remove any applications that you aren’t utilizing.
- Uninstall any apps that you don’t need on your phone.
- In Safe Mode, look at your smartphone.
- If available, update your program to the most recent version.
- If all of the preceding methods fail to resolve your issue, the final option is to factory reset your Poco X3.
- That’s All There Is To It
Poco X3 has a slow or lagging user interface.
Solutions:
- Remove the program from the Recent tab that you aren’t using.
- Restart your Poco X3 after that. This shuts off any background processes that aren’t needed.
- Turn off the battery saving mode on your phone if it is on.
- While charging your phone, avoid playing games or opening any applications.
- Clear the Poco X3’s System cache partition.
- Do you still have issues with the touch screen? If that’s the case, your Poco X3’s last choice is to factory reset it.
- That’s All There Is To It
Must Read: How to Fix Overheating in the Poco M3 Pro 5G!
Battery of the Poco X3 is rapidly depleting.
If you’re experiencing battery depletion on your Poco X3, you’re not alone.
Follow the instructions below to resolve the issue of battery depletion on your Poco X3:
Solutions:
- To begin, disable auto-brightness and adjust the brightness to your preferences.
- Make careful you choose the shortest possible screen timeout time.
- Go to Display > Screen timeout in Settings. Choose the shortest possible screen time (Recommended 30 Seconds)
- Activate the Power Saving Mode.
- Optimize all of your applications.
- Go to the Battery and Device Care section of the Settings menu. Select Optimize Now from the drop-down menu.
- That’s All There Is To It
Problem – Apps on the Poco X3 Crash Suddenly
Users of the Poco X3 have been experiencing app crash issues since the device’s launch:
Don’t worry, this app crash issue isn’t exclusive to the Poco X3 phone; other devices have also had similar issue.
Solutions:
- To begin, reset the app’s preferences.
- To do so, go to Apps > Settings > Apps > Apps > Apps > Apps > Apps > Apps > Apps Activate the three-dot menu. Last but not least, tap Reset App Preferences.
- Check to see whether there is a new software update available for your phone, and if so, install it.
- If your phone is experiencing issues as a result of a single program, go to Settings Apps, select that app, and delete its data and cache.
- After you’ve completed all of these instructions, restart your device.
- That’s All There Is To It
Touch screen problems on the Poco X3 are an issue.
If your Poco X3’s touch screen is sluggish or unresponsive, I’ve included some simple instructions below to help you resolve the issue.
Solutions:
- First, restart your device to see whether your issue has been resolved.
- Make sure your phone’s screen is nice and clean.
- Taking off the old screen protector is a must.
- In Safe Mode, check your Poco X3.
- Clear the phone’s System cache partition.
- Do you still have issues with the touch screen? If that’s the case, your Poco X3’s last choice is to factory reset it.
- That’s All There Is To It
The fingerprint sensor isn’t functioning, which is a problem. X3 Poco
Users of the Poco X3 have reported issues with the device’s fingerprint reader on many forums and discussion sites.
This issue may occur for a variety of causes; tell us how to resolve it:
Solutions:
- Make certain you’re using the same finger you used to set up the fingerprint.
- This issue may potentially be caused by a malfunctioning fingerprint sensor on your phone; check to see whether the fingerprint sensor is scratched or broken.
- Remove the existing fingerprint from your Poco X3 and replace it with a fresh one.
- Go to Biometrics and Security > Fingerprints > Settings. Replace your previous PIN, pattern, or password with your new one. Fingerprints that have been registered Remove the item and then remove it again. Add a fresh fingerprint to the mix.
- Do you still have issues with the fingerprint sensor? If that’s the case, you may wipe the phone’s cache partition.
- That’s All There Is To It
Fixing the Redmi Note 10 Pro’s Fingerprint Sensor Not Working?
Unable to send text messages on the Poco X3 is an issue.
Solutions:
- First, make sure the phone number you’d want to send the message to isn’t banned.
- Clear the cache of your Poco X3’s default messaging app.
- Delete outdated messages if you don’t need them.
- Restart your Poco X3 and see whether your problem has been resolved.
- Activate flying mode once again. Turn off the light.
- That’s All There Is To It
Problem – The Poco X3 is unable to make or receive phone calls.
Solutions:
- Remove your SIM card and re-insert it into your phone.
- Restart your device after that.
- Install any new software updates that are available for your Poco X3.
- Check to see whether your Poco X3 is in flight mode, and if it is, switch it off.
- Reset the network settings on your phone.
- That is all there is to it
Bluetooth not functioning on the Poco X3?
Bluetooth is often switched off owing to a low battery or because Bluetooth is not enabled in the phone.
Solutions:
- Always keep an eye out for new software updates.
- Also, check sure the Bluetooth device is turned on and that both devices have Bluetooth enabled.
- To connect to Bluetooth, both phones must be within range of each other, therefore double-check the Bluetooth connection range.
- Restart both devices at the same time.
- If the issue persists, try resetting the network settings on your device.
- That’s All There Is To It
Read this article to find out why your OnePlus Nord CE 5G’s Bluetooth isn’t functioning correctly. What to Do About It!
Microphone on the Poco X3 isn’t functioning.
Solutions:
- To begin, restart the phone and record your voice to see whether the microphone is working properly. The microphone is fine if you enjoy the sound quality of the recorded voice.
- Once you’ve done so, boot your phone into safe mode. If your phone’s microphone works well in safe mode, then the issue is with any third-party apps you’ve installed; remove them.
- Check for any new software updates on your phone and, if any are available, install them.
- If the issue persists, do a factory reset on your Poco X3.
- That’s All There Is To It
Problem – The Poco X3 keeps stalling or crashing.
It seems to be extremely terrible and upsetting if your Poco X3 phone is continually stalling or crashing.
But don’t worry, I’ve listed some troubleshooting methods below that may help you resolve your issue without having to submit your phone to a Xiaomi service center.
Solutions:
- To begin, force restart your Poco X3.
- For a few seconds, press and hold the Volume Down and Power buttons at the same time.
- Make sure you have the most recent version of your software.
- Once you’ve done that, restart your device in Safe Mode. Here’s How to Get Started
- If a certain program is causing this issue on your Poco X3, try clearing the cache and data for that application.
- Select the Crashing App in Settings > Apps > Storage > Clear Cache & Clear Data.
- If the issue persists, do a factory reset on your Poco X3.
- That’s All There Is To It
Fixing Touch Screen Issues on the Samsung Galaxy A22 5G is a must-read.
Conclusion:
So, in this tutorial, I’ve covered all of the Poco X3’s frequent issues.
Above, I’ve highlighted several significant problems as well as a tried-and-true method for resolving them. I hope you enjoyed reading this post.
If you have any additional issues with your Poco X3, please let us know in the comments section below.
I’ll do my best to fix your problem as quickly as possible, and thank you for sticking with this tutorial all the way to the finish.
The poco x3 battery drain problem is a common issue that many POCO 3 users are facing. This article will provide proven fixes for the problem.
Frequently Asked Questions
Does Poco X3 have network issues?
Yes, the Poco X3 has network issues.
How do I fix Poco X3 Touch issue?
The issue you are experiencing is because the Poco X3 Touch has a faulty connection with your device. This can be fixed by trying to restart your device.
Why is my Poco X3 lagging?
The Poco X3 is a low-end phone, and it is not meant for intensive games. If you want to play Beat Saber, you should upgrade to a different device with more RAM.
Related Tags
- poco x3 screen issues
- poco x3 issues philippines
- poco x3 heating issue fix
- poco x3 battery drain after update
- poco x3 pro touch response